How to Print Sticker Using your Home Printer

Printing your own stickers at home saves money and lets you personalize and print just how many you need.

A standard inkjet printer can print stickers, but you’ll need to prepare to prevent wasting ink or sticker paper.

If you want to print hundreds of stickers on an inkjet printer, examine its instructions to see how many cartridges it needs. The cost of ink may make this more costly than purchasing the best printer for stickers online.

Purchase Sticker Paper

Get some premium inkjet sticker paper to print standard stickers on. The majority of office supply stores and the internet both carry this paper.

In this situation, 50-sheet bundles of letter-sized paper are often available. Another option is to make vinyl stickers at home using special sticker paper.

Design your Own Sticker!

Create your sticker using the app you are most familiar with.

Use any software that lets you write text and insert images, such as Microsoft PowerPoint, a word processor like Microsoft Word, or a photo editing tool like Photoshop or GIMP.

As a rule, use a letter-sized document. If you want to create a lot of stickers, arrange them on one sheet to make the most of your paper, but make sure there is enough space between each sticker for you to cut them out separately.

Online access to sticker templates is now made available by sticker paper manufacturers.

Be Wary of the Colors on Stickers

Take a look at the colors that were used to make your sticker. The ink supply in an inkjet printer may get depleted if colors are used often.

If your design has a lot of blue elements, for instance, printing multiple stickers may cause the blue ink to run out.

Print a test page first.

Print a test page on some plain paper to ensure that your printer is producing the quality you want.

Use inexpensive plain paper until you are sure your design will come out as you had hoped it would, or until you have the money to pay the possible 20 cents a page for inkjet sticker paper.

If you’re unclear about which side is up and which is down like the best sublimation printer for beginners, mark one side of the paper before inserting it into the printer.

To decide which way to insert the sticker paper, watch the mark as it emerges.

Insert the Sticker Paper

Only one sheet of sticker paper should be placed in the printer for printing.

If your printer has a specific single-page feeder, use it; if not, feed one sheet of paper into the device as normal.

Since sticker paper is thicker than regular paper, the printer may clog if you try to feed more than one sheet of sticker paper into it at once.

Before using the sticker paper, make sure it is completely flat and free of wrinkles or bends. It is possible for a piece of sticker paper with a bent corner to get stuck in the printer’s rollers.

Let the Stickers Dry Completely

Avoid touching any of the ink that is on the printed sheet’s surface when you remove it from the printer.

Put it somewhere level so that it can dry.

Due to the high ink concentration needed to print images, the procedure may take several minutes longer than it does to print text pages.

Cut the Stickers Out

To cut out the stickers, you may either use a paper cutter if you have one available, or extremely sharp scissors if you don’t.

When you’re ready to use a sticker, just as you would with the one you bought from a store, take off the backing from